|
|
| Romy the Cat's
personal site dedicated to advanced audio and evolved music reproduction
techniques
|
|
 |
|
|
|
|
|
I was slowing mingling the conversion of the power supplied of my second Super Milq from 3 channels into 6 channels and I ask myself: is anything in that amp is made in the way that would allow me to close it up and never review it. Sure if I move in...
|
|
[quote user="drdna"] Fundamentally I think the injection channel and layered sound are different things. The injection channel is designed simply to compensate for the timbral shortcomings of a particular driver. However, because of lobin...
|
|
I was kind of frustrated with some strange high frequency roll off at my HF and Injection channels. It should not happen. The 9H OPT LL1627 in Injection channels should be good up to 23kHz according to my former tests with a full range Milq and the T...
|
|
I have to tell you that I would go little obnoxious with my ides of the “Injection Channel” and if I have a change then I would drop the resonant frequency of the box with the Reds. I do not what to commit myself with this project but if someone loca...
|
|
After thinking about this for a while, I have had a thought that should be relatively easy for anyone motivated to explore and I would be interested to see what others on this forum observe from such experiments.Fundamentally I think the injection ch...
|
|
[quote user="RonyWeissman"]… i play guitar….[/quote] If you play guitar than do you know that you might affect harmonics of your upperbass by placing your guitar between your listening spot and loudspeaker? A guitar is a very powerful Helmholtz reson...
|
|
There is a lot that is not there yet. There is no injection channel; there are no 2-drivers extension for
bass towers. I am progressing slower than before: 3 kids under 2, so it is kind
of hard. The injection channel will be
in a new enclosure, th...
|
|
Ok, the Injection Channel project is over. I dumped the boxes not heavily and very conventionally, painted them, installed the drivers and crossovers. Sure, before I put the injection channels into the Macondo frame I flipped them upside down and tri...
|
|
[quote user="Romy the Cat"]I will slowly upload, as time permits to write them, different posts on the subject of Ultimate MF Compression Driver. [/quote]This will be a bit controversial subject among the compression drivers users but it is only ...
|
|
[quote user="Rewind"]Hi, I am slowly building my own Macondo. I understand why the injection channel is there. It brings some kind of softness that the compression drivers lack. [/quote] OK, but it is not how I feel about the service of injection...
|
|
[quote user="Jorge"]I guess it would be simple enough to add a couple of inches in order to bring the throat down to 4" in order to try the Studio 8M. I have already reduced it temporarily to 3" in order to try the JBL 2490h compression driver. ...
|
|
Hi,I am slowly building my own Macondo. I understand why the injection channel is there. It brings some kind of softness that the compression drivers lack. I am using a 12" JBL midbass driver (~100dB sensitivity) in a 50L single driver Marshall cabin...
|
|
I wrote about it before and I was/am afraid this effect too. I discovered it a few years back when suddenly my bass picked some odd harmonics. After a few days I realized that the harmonics came from an acoustic guitar that was sitting in my list...
|
|
el`Ol,
it is so obvious with simple listening where is right polarity that is you try it you would not have doubts where is “right” and where is “wrong”. It is very clearly where the Red works with Macondo and where they work against each othe...
|
|
Romy wrote : "If someone discover a 4-5” driver that can have the same Syrupy Sound as the Red 10” then please let me know" I will be trying some older alnico drivers in the Mid-Bass horns (the first pair should arrive in about 2 weeks time). I have ...
|
|
Well, never say never and what I said that the Injection Channel is done it meant that it WAS done. I am experimenting now with other way of use Red injection. The application as is at the picture practically had no impact to imaging. However, I need...
|
|
Miab, since what I became an expert in cables? I am as much as anyone else – a subject of accidental discovering...
I do not use in Injection Channel any fancy cables. There is not a lot of need for it. The Injection Channel is mixed with M...
|
|
[quote user="jessie.dazzle"] Its still not perfect, and I had the mic 1m from the membrane of the driver (had not yet read Romy's last post where he recommends putting the mic back at listening point). [/quote]
I would like to stress it again that t...
|
|
[quote user="jessie.dazzle"] Your latest post got me thinking in a sort of incomplete way about how you might locate the injection channel... If you consider tone as a harmonic of the original source, then (depending on the order of harmonic) it may ...
|
|
[quote user="Romy the Cat"]
[/quote] Got today home, turned the playback on and realized the electricity got better. Not as god as it should be but much better. At lest each ambient sting instrument did not surround surrounded with a cloud of whi...
|
|
I put the YO186 back to the use. The sound was fine but it had that a fine over glow of spoiled fall colors that I described before. It was not disgusting, in fact pleasurable but a bit too much.
Then I asked to myself what happen and why this...
|
|
[quote user="oxric"] My mistake. I should not use the term Lecleach on this site. [/quote]
There is absolutely nothing prohibitive in Lecleach profile, it works very nice for HF but the La profile shall not be used in cases where vertical clea...
|
|
[quote user="jessie.dazzle"] Assuming you go ahead with the mid-bass horn project: If you decide to run the woofer towers along with the mid-bass horns, it is logical to assume they'll produce much of the range produced by these new horns. [/quot...
|
|
About the 1250Khz secondary resonance: Romy wrote:"...My MF channel is crossed well above secondary resonance – at 3200Hz... I get my 1000Hz by gliding the filter-declining slope of the secondary resonance..."I know this... What I'd really like to s...
|
|
Romy, during my own quest for a center channel I met (the late) James Bongiorno, all of which I've written about before at GSC. James was a passionate proponent of the center channel, and to that end he developed the Trinaural Processor, which is ana...
|
|
Below are some images that show the locations of the various filter caps within the amplifier chassis.The big cap for the First Stages is located directly below the 6E5P tubes...The big filter cap for the Bass Channel is adjacent to the Bass OPT (pee...
|
|
I am making steady progress putting together my DSET amplifiers. Life and work gets in the way but I am chipping away at it, taking my time, not rushing, enjoying it. Wow, it is a lot of work and an enormous task for my first complete amplifier bui...
|
|
[quote user="Romy the Cat"]
[/quote]In my new room I would like to accomplish my long objective to get for Macondo a new Fundamental Channel. I would like my Fundamental Channel to employ 170-180 Hz slow-opening horn and to use a driver with 350-4...
|
|
[quote user="haralanov"] Let pretend you have (at least hypothetically) really excellent (satisfying your reference points) single UB channel. Then how are you going to achieve the coaxial effect one gets with 4 allocated in space channels? It will b...
|
|
[quote user="jessie.dazzle"] I am certain that the depth of such an experience .. is very dependant on the system+room; whether something in the system can bring about a more crystalline state of mind… I will be very curious to see how this 7th chann...
|
|
|
|
|
All context of this site except the Forum's posts
Copyright © Roman Bessnow 2004-2024
All messages within the Site’s Forum Copyright © by
authors of the posts
|
|
Last 24-hours posts: |
1 |
|
 |
|
|
Total human visitors: |
42,917,444 |
|
|
|
|
|
|